Irya
iryafasteners.com
Contact & Support
Ahmedabad, Gujarat, INDIA.
Irya Fasteners USPs
With Irya Fasteners, you would always have the following :
Prompt communication
Prototyping to bulk supplies
Customized Parts, Process & Packaging
Assistance with Part Design
Quality parts, on time delivery
Inventory Management & Warehousing
PPAP Documentation, when required

LOW CARBON STEEL :

Generally they contain less than 0.25% carbon. SAE Grade 2 (Metric class 4.6,4.8 & 5.8) fasteners are made with AISI grades 1006, 1010, 1016, 1018, 1022 & 1035 being low carbon steels.
aluminum

MEDIUM CARBON STEEL :

They have a carbon content between 0.25% to 0.60%. SAE Grade 5 (Metric class 8.8) fasteners are made out of medium carbon steels with AISI grades 1038, 1541, 5132 & 5135 and also ASTM A194 Grade 2, 2H, & 2HM, ASTM A325, ASTM A449.
stainless steel

ALLOY STEEL :

These are carbon steels that have additives eg. boron, manganese, chromium, silicon etc. SAE Grade 8 (Metric class 10.9,12.9) fasteners are generally manufactured out of alloy steel with AISI grades 4137, 4140 (B7), 4340 & 5140 and also ASTM A307 - Grade A/B/C, ASTM A194 Grade 4, 7, & 7M, ASTM A193 B7 & B7M, ASTM A320 Grade L7, L43 falling into this category.
plastics

AUSTENITIC STAINLESS STEEL :

They have a chromium content between 15% to 20% and nickel between 5 % to 19 % and offer a higher degree of corrosion resistance than the other two types of stainless steels. This category includes AISI grades 302, 303 (A1), 304 (A2), 304L (A2), 310, 316 (A4), 316L (A4), 316Ti (A5), 316Cb (A5), 317 (A4), 317L (A4), 321 (A3), 347 (A3), 348 (A3) & 904L (Uranus B6) and also ASTM A194 Grade 8, 8M, ASTM A193 B8 & B8M, ASTM A320 Grade B8 & B8M.
carbon steel

MARTENSITIC STAINLESS STEEL :

They contain between 12 % to 18 % chromium, can be hardened by heat treatment, have poor welding characteristics, and are considered magnetic. Martensitic stainless steels include AISI grades 410 (C1), 416 (C4), 420 (C1) & 431 (C3).
alloy steel fasteners

FERRITIC STAINLESS STEEL :

They contain between 15 % to 18 % chromium and is a non heat-treatable, magnetic and has very poor weld characteristics. It should not be used in situations where the likelihood of corrosion is high and includes grades 430 (F1) & 430F.
martensitic stainless steel

ALUMINUM :

It is a lightweight metal that has a high strength to weight ratio, good corrosion resistance in most environments, excellent electrical and thermal conductivity. Aluminum fasteners are usually manufactured from AISI grades 2024, 6061, 6262 & 7075.
austenitic stainless steel

NON-FERROUS :

Materials used are Cupro nickel 70/30 & 90/10, Copper, Silicon bronze, Phosphor bronze, C63000, Aluminium bronze, Manganese bronze, Brass, Nickle, and Titanium.
ferritic stainless steel

SPECIAL MATERIALS :

These materials are often referred to as super alloys because of their ability to perform in extremes of temperature or posess extremely high strength qualities as compared to standard fasteners materials. Following are some of the common special proprietary materials that are used for the manufacture of fasteners for special applications. MONEL 400® (UNS N04400), MONEL K 500® (UNS N05500), INCONEL 600® (UNS N06600), INCONEL 718® (UNS N07718), INCONEL X-750® (UNS N07750), INCOLOY 825® (UNS N08825), HASTELLOY B-2® (UNS N10665), HASTELLOY ® C Series
low carbon steel

PLASTICS :

Plastics are light-weight, non-metallic and non corrosive under normal circumstances. The characteristics of plastics may be further enhanced by chemical and fiber additions to increase strength, hardness, flexibility, temperature and ultra-violet resistance. There are a variety of plastic materials that we use depending on the desired outcome and applications such as: HDPE (High density polyethylene), LDPE (Low density polyethylene), PP (Polypropylene), POM (PolyOxy Methylene), Polyamide - Nylon (PA 6, PA 66) / Cast Polyamide, PTFE (Polytetrafluoroethylene), PEEK (Polyetheretherketone)
medium carbon steel